Completed

Design A Submersible Water Pump

Published on the December 09, 2013 in Engineering & Manufacturing

About this project

Open

To develop a submersible water pump that can be used in outdoor water dancing fountains. The water pump should be made of stainless steel, with an output of 2inches of the diameter of the nozzle, and be able to launch a vertical water jet (without pipe) from ground level up to 12 meters height, and 2 inches of diameter. The pump will be manufactured in mass production, so we need all the complete and detailed drawings of every element of the pump, and 3D models and drawings for prototypes.
In the attached photo you can see the type of water jet that we need from the pump. Each pump will provide one water jet. The pump will be connected to a frequency inverter to controll the height of the water jet.
The type of nozzle may vary to reduce the power requirement of the pump.

Category Engineering & Manufacturing

Delivery term: January 08, 2014

Skills needed

Other projects posted by G. H.