Spin Table

Diseno de un Spin Table para una maquina TM105 Ventura Flex

This design includes a base plate assembly and a top plate assembly. The base plate assembly
includes a ¼” thick aluminum hexagonal base pate with rollers bolted to the top side, rubber feet
bolted to the bottom side, and a spacer welded in the center. The top plate assembly includes a
14 gauge stainless steel formed top measuring 25” square by 1.58” tall.
A shoulder bolt attaches
the top plate to the base plate assembly, using an aluminum nut welded to the bottom of the
base plate and bronze thrust bearings used as washers between the top of the spacer and the
bottom of the top plate.