About this project
design-multimedia / 3d-models
Open
We are seeking a skilled 3D artist to create a photorealistic architectural render of a modern elevated wooden cabin. The cabin will be suspended 2.8 meters above ground on a dark gray steel frame, featuring diagonal cable cross-bracing underneath. The final output should be an 8K resolution image with highly detailed textures, set against a natural pine forest background with cinematic natural daylight.
Key specifications include:
- Layout & Dimensions: Total 7m front width. An integrated 2m x 7m wooden deck will run along the entire front facade, complete with safety guardrails and a straight 2-flight access staircase on the left.
- Deck Amenities: The far right edge of the deck will feature an integrated sunken immersion bathtub built flush with the deck floor. Just in front of the tub, a flat suspended mesh net hammock will be integrated into the deck frame, replacing traditional railings.
- Roof & Beams: A single-slope thermoacoustic roof will extend to a 0.5m overhang past the deck edge, with a white interior film ceiling. Main columns and front frames are to be dark steel, while the roof top support rafters beneath the sheeting should be exposed light-colored hardwood timber beams extending to the overhang edge.
- Facade & Bath: The full 7m front facade will consist of floor-to-ceiling glass with dark metal framing. The far right interior will house a 1.35m x 3m bathroom, fully visible from outside, containing a glass sauna (1.0m x 1.35m with glass on front and right walls) in the front right corner, followed by a sink and toilet at the back.
- Interior Open Plan: To the left of the bathroom, the cabin will feature an open-plan layout with a bedroom on the far left and a compact kitchen in the middle.
- Materials & Finishes: The exterior deck should be rendered with outdoor wood boards, the interior cabin floor with tongue-and-groove hardwood, and the interior bathroom partition with clean white drywall.
Category Design & Multimedia
Subcategory 3D Models
What do you need? 2 to 6 pieces
Delivery term: Not specified
Skills needed